If you’re a metal fabricating company, you probably see sheet metal and plates come in all the time. The metal appears to be flat at a glance, but even slight variations in flatness may cause big problems during the fabrication process. Read on to learn what metal leveling is and why it’s important.
Metal Leveling
Stresses in metal material from the mills result in metal that is not perfectly flat. Metal leveling bends metal into a level position through a series of work rolls. Metal is fed through the rolls multiple times until it achieves an ideal level of evenness that won’t revert during the metal fabrication process.
Rolling Machines
A hot rolled leveling machine is the best way to ensure your metal is level. Whether you need the metal for aerospace, construction, or engineering, this process will yield the best, most consistent results at a reasonable cost.
What’s the Big Deal?
Even though you understand what metal leveling is, you may still be unclear as to its importance. Let’s say you use a laser cutter to cut metal into specific shapes. If the metal you’re cutting is not level, it could tilt upward after being cut, creating an obstacle for your laser cutting head. Not only will the laser cutting head ram into the metal, damaging your product, but it can also damage the laser cutter.
All of a sudden, you’re left with a defective product and without the tools to try again! Whether the problems caused by unlevel metal require significant repairs or simple downtime and trial and error, money loss is never a good thing. When your metal is level, you can rest assured knowing all your tools will work as they should.
Now that you know what metal leveling is and why it’s important be sure to have your steel leveled before you try and machine it! Otherwise, you know all the problems unlevel metal can cause.
Comment
Comments