Having a server room for your business isn’t easy. You become responsible for many factors that keep your data center up and running, including humidity and temperature control, noise, hot spots, and cable management. At some point, you’re bound to deal with a malfunction of some kind. For that reason, you must learn about common server room problems and how to solve them. Read below to find out more.
High Temperatures
You can expect servers and other equipment to give off a lot of heat if you have a data center. Overheating is a strong possibility that can damage or even melt your servers and the rest of your equipment. Because of this, it’s important to ensure your data center is at the right temperature so you don’t have to worry about overheating.
The best way to do this is to create proper airflow circulation and air conditioning placements in your layout. Make sure you use a thermometer to keep your temperature between 68 to 72 degrees. This way, you can reduce hotspots and dangerous temperatures. Overheating is a critical server room problem, so you must be prepared to solve it.
Excessively High or Low Humidity
When you have a data center, humidity should be a top concern. If your humidity is too high, water condensation could create rust and corrosion and cause your servers to short-circuit. However, there are also many dangers of low humidity in server rooms.
If your server room’s humidity is too low, the dry conditions may create electrostatic discharge. This discharge of electricity can cause your servers to malfunction. To avoid this, you should set your humidity levels between 45 to 50 percent and make sure you have a system that will monitor your humidity levels 24/7.
Water Damage
Water damage is an issue for many server rooms and data centers and can be caused by humidity or other factors. Water leaks can cause your equipment to shut down. Most leaks come from damaged plumbing behind ceilings and walls, and even a small leak can cause big damage over time.
To avoid water damage, make sure that you check for any leaks in the walls regularly and nip them in the bud when you see them. Check for discoloration, stains on the wall, and condensation. Another thing you can do to avoid leaks is to keep your data center away from places with plumbing, like bathrooms or boiler rooms. If you come across any of these problems, you’ll be well-equipped to handle them going forward.
Comment
Comments